3/4 IN PACK JOINT CURB STOP BRASS VALVE

$211.69

Excl. tax

Only for underground water service installations to permit shut off of the water supply from the water main to the building.
Lead-free design is suitable for all no-lead potable water installations for residential, commercial and industrial applications

Only for underground water service installations to permit shut off of the water supply from the water main to the building
Lead-free design is suitable for all no-lead potable water installations for residential, commercial and industrial applications
Pack-joint end connections offer greater mechanical pull-out resistance over ring-compression connections
The pack-joint nut's clamp has a special thread called a "buttress-type", which is designed and shaped to bite into the softer plastic pipe or tubing
The Buna-N gasket and anti-friction ring assure a positive compression-type seal and act independently of the clamp. Equipped with a 3/8 inch slotted, 304 SS clamp bolt
90 degree operation with enclosed operating head stop, which has been drilled to accept stationary rod cotter pin attachment
Durable, Teflon-coated ball assures positive, bubble-tight shutoff, low torque operation and long service life
Full-port, ball-and-seat design is superior to plug-type designs
Designed to be installed onto Type K or L copper water tubing compliant with ASTM B88 and polyethylene plastic tubing compliant with ASTM D2737 SDR 9
Rated at 300 CWP (cold working pressure) 100 psi. Not suitable for steam service.
Insert stiffener is required (sold separately) and is installed inside the open end of the tubing or pipe to help prevent collapse from compression forces

0 stars based on 0 reviews

Add your review